Follow these easy steps to get your Electrolux ZDC 46130 S Dryer up and running in no time.
Ensure that the electrical connections comply with the installation instructions provided in the manual. This is crucial for safe and effective operation.
Remove the polystyrene block and any other material from the drum of the dryer. This prevents any obstruction during operation.
The dryer must be placed on a firm, level surface to minimize vibration and noise. Use a spirit level to ensure it is absolutely level. It should not be installed behind a lockable door, sliding door, or a door with a hinge on the opposite side.
After installation, ensure the appliance is not pressing or standing on its electrical supply cable. If stacking on a washing machine, use the optional stacking kit.
Before first use, place a few damp cloths inside the drum and run a drying cycle for 30 minutes. This helps in removing any dust or residues.
Ensure the room is well-ventilated. The temperature should not exceed +35°C during operation to ensure optimal performance.
The appliance must not be built-in. Ensure there is adequate clearance around the dryer for air circulation, especially in the front ventilation grille and back air intake grilles.